WATER TREATMENT SOLUTION

Wastewater Treatment

Practical wastewater treatment solutions for reducing suspended solids, organic contaminants, color and other pollutants — supporting discharge compliance, downstream treatment and water reuse applications.

WASTEWATER TREATMENT CHALLENGES

Wastewater Characteristics Vary Across Processes and Industries

Wastewater composition can vary significantly according to the water source, industrial process, raw materials, production conditions and existing treatment system. Suspended solids, color, organic matter, oils, metals and other contaminants may all influence the required treatment approach.

Effective wastewater treatment therefore requires an understanding of both contaminant characteristics and treatment objectives. The process may be designed for discharge, pretreatment before biological or membrane systems, polishing, or preparation for water reuse.

Start with wastewater characterization. Water analysis, flow variation, contaminant load and target discharge or reuse requirements are important when evaluating treatment options.
TREATMENT OBJECTIVES

What Wastewater Treatment Needs to Achieve

Treatment objectives depend on wastewater composition, discharge requirements and whether the treated water will be discharged, further treated or reused.

Reduce Suspended Solids

Remove particulate matter and reduce turbidity before downstream or final treatment.

Control Organic Contaminants

Reduce organic compounds that contribute to COD, odor, color and downstream treatment load.

Improve Water Quality

Improve clarity, color and overall treated-water quality according to the application.

Support Discharge or Reuse

Prepare wastewater for compliant discharge, advanced treatment or water reuse systems.

TREATMENT APPROACH

A Multi-Stage Approach to Wastewater Treatment

Wastewater treatment may combine physical, chemical, biological and polishing stages depending on wastewater characteristics and treatment objectives.

01

Pretreatment

Remove coarse solids, suspended material, oils or other contaminants that may interfere with downstream treatment.

→
02

Primary Treatment

Use settling, coagulation, flocculation, filtration or other methods to reduce suspended and colloidal material.

→
03

Contaminant Removal

Apply biological treatment, adsorption, chemical treatment or other processes for organic and dissolved contaminants.

→
04

Advanced Treatment & Polishing

Apply activated carbon, filtration, membranes or other polishing technologies where higher treated-water quality is required.

Important: Wastewater treatment processes should be selected according to actual wastewater composition, contaminant concentration, flow variation and target discharge or reuse requirements.
COMMON WASTEWATER ISSUES

Common Challenges in Wastewater Treatment

Different wastewater streams contain different combinations of physical, organic and inorganic contaminants.

Suspended Solids

Particulate material can increase turbidity and loading on downstream processes.

COD & Organic Matter

Dissolved and suspended organic compounds may contribute to COD and treatment demand.

Color

Dyes, dissolved organics and industrial compounds can contribute to persistent wastewater color.

Heavy Metals

Metals may require targeted precipitation, adsorption or other treatment methods.

Oil & Grease

Oils and hydrocarbons can interfere with biological, membrane and filtration systems.

Taste & Odor Compounds

Certain organic compounds may contribute to undesirable odors in treated wastewater.

Nutrients

Nitrogen and phosphorus may require additional treatment depending on discharge requirements.

Variable Load

Changes in flow and contaminant concentration can affect treatment stability and system performance.

RECOMMENDED PRODUCTS

Products Commonly Used in Wastewater Treatment

Treatment materials should be selected according to wastewater composition, contaminant load and treatment objectives.

TYPICAL APPLICATIONS

Where Wastewater Treatment Solutions Are Used

01

Industrial Wastewater

Treatment of wastewater generated by manufacturing and industrial processes.

02

Municipal Wastewater

Treatment and polishing for municipal wastewater applications.

03

Food & Beverage Wastewater

Treatment of wastewater containing organic matter and suspended solids.

04

Chemical Process Wastewater

Treatment of process streams containing complex organic and inorganic contaminants.

05

Advanced Wastewater Polishing

Final treatment to improve water quality before discharge or reuse.

06

Water Reuse Pretreatment

Wastewater preparation before membrane treatment or reuse systems.

APPLICATION INFORMATION

Information That Helps Us Recommend a Suitable Solution

Wastewater treatment selection depends on contaminant composition, concentration, flow variation and required treated-water quality.

Submit Your Water Requirements →
01
Wastewater Source

Industrial process, municipal wastewater, food production or another source.

02
Wastewater Analysis

COD, BOD, TSS, color, pH, metals, oils and other relevant parameters.

03
Flow Rate

Average and peak wastewater flow in m³/h or m³/day.

04
Existing Treatment Process

Current pretreatment, biological treatment, filtration or other installed processes.

05
Treatment Objective

Discharge, contaminant reduction, advanced polishing or water reuse.

06
Target Water Quality

Required discharge limits or reuse-water specifications.

TECHNICAL RESOURCES

Learn More About Wastewater Treatment

Explore technical articles covering wastewater contaminants, filtration, adsorption and advanced treatment methods.

FREQUENTLY ASKED QUESTIONS

Wastewater Treatment FAQ

Wastewater treatment should be evaluated according to actual wastewater composition, flow and required treated-water quality.

What are the main stages of wastewater treatment?

Wastewater treatment may include pretreatment, primary treatment, biological or chemical treatment, filtration and advanced polishing. The required sequence depends on wastewater characteristics and treatment objectives.

Can activated carbon be used for wastewater treatment?

Activated carbon can be used for adsorption of selected organic contaminants, color, odor and residual pollutants, particularly in advanced or polishing applications.

How can COD be reduced in wastewater?

COD reduction may involve biological treatment, coagulation, oxidation, adsorption and other treatment methods depending on the nature of the organic contaminants.

What information is needed before selecting wastewater treatment products?

Wastewater source, water analysis, average and peak flow, existing treatment process, treatment objective and target water quality are useful starting points.

Can treated wastewater be reused?

In many applications, wastewater can undergo additional filtration, adsorption, membrane treatment or disinfection before reuse. The required treatment depends on the intended reuse application.

Is one wastewater treatment process suitable for every industry?

No. Wastewater from food processing, chemical production, municipal systems and other industries can have very different contaminant profiles and therefore require different treatment approaches.

WASTEWATER PROJECT SUPPORT

Looking for a Suitable Wastewater Treatment Solution?

Tell us your wastewater source, analysis, flow rate, existing treatment process and treatment objective. Our team can discuss suitable treatment products and process options with you.

Email Inquiry WhatsApp Phone