OIL & GAS

Oil & Gas Water Treatment

Water treatment materials and application-focused solutions for produced water, injection and make-up water, process and utility water, oily wastewater treatment and advanced water reuse across oil and gas operations.

OIL & GAS WATER TREATMENT

Managing Challenging Water Across Oil & Gas Operations

Water is involved throughout oil and gas operations, including production, injection, separation, processing, equipment utilities, wastewater management and selected reuse applications.

Produced water and oily wastewater can contain free and dispersed oil, suspended solids, dissolved hydrocarbons, salts, hardness, iron and other naturally occurring or process-related contaminants.

Because water characteristics can vary significantly between fields and operating conditions, treatment may combine oil-water separation, filtration, adsorption, chemical conditioning, membrane treatment and polishing according to the required outlet water quality.

Produced-water treatment begins with characterization. Oil and grease, suspended solids, salinity, hardness, dissolved organics, iron, pH, treatment flow and intended water use should be evaluated before selecting treatment materials and technologies.
KEY TREATMENT AREAS

Water Treatment Across Oil & Gas Operations

Treatment requirements differ according to whether the water will be discharged, reused, injected or used within plant utility systems.

01

Produced Water Treatment

Treatment of produced water containing oil, suspended solids, dissolved organics, salts and other formation-related contaminants.

02

Injection & Make-Up Water

Filtration and conditioning of water used for injection and other field applications where solids and scaling risks must be controlled.

03

Process & Utility Water

Treatment for boiler, cooling, washing and other water systems supporting oil and gas processing facilities.

04

Wastewater & Water Reuse

Advanced treatment and polishing of wastewater for suitable reuse, discharge or further purification applications.

COMMON WATER QUALITY CHALLENGES

Common Challenges in Oil & Gas Water Treatment

Produced water and process wastewater can contain a complex mixture of oil, solids, dissolved salts and organic contaminants.

Oil & Grease

Free, dispersed and emulsified oil can increase treatment complexity and require staged separation and polishing.

Suspended Solids

Sand, corrosion products, precipitates and formation solids can increase filtration demand and downstream fouling.

Dissolved Hydrocarbons

Selected dissolved organic compounds and hydrocarbons may require adsorption or advanced polishing after primary treatment.

High Salinity & TDS

Produced water can contain high concentrations of dissolved salts that affect reuse, membrane treatment and disposal options.

Hardness & Scale

Calcium, magnesium, barium, strontium and other scale-forming constituents can affect piping and treatment systems.

Iron & Metals

Dissolved or particulate metals can contribute to deposits, discoloration and loading on downstream treatment equipment.

COD & Organic Loading

Dissolved and dispersed organics can increase COD and affect biological, adsorption and membrane-treatment stages.

Variable Water Chemistry

Produced-water composition can change with formation conditions, production stage and operating practices.

RELEVANT SOLUTIONS

Water Treatment Solutions for Oil & Gas Applications

Explore treatment approaches for industrial water, oily wastewater, dissolved organics, metals, membrane pretreatment and water reuse.

RECOMMENDED PRODUCT FAMILIES

Water Treatment Materials for Oil & Gas Applications

Product selection should be based on oil content, contaminant chemistry, salinity, suspended solids, treatment process and required outlet water quality.

APPLICATION INFORMATION

Information That Helps Us Understand Your Oil & Gas Water Project

Treatment recommendations depend on the source-water or produced-water characteristics, target contaminants, treatment flow, intended use and required outlet quality.

01
Water Stream

Produced water, injection water, process wastewater, utility water or another water stream.

02
Water Analysis

Oil and grease, TSS, COD, TDS, hardness, iron, pH and other relevant parameters.

03
Target Contaminants

Hydrocarbons, suspended solids, salts, metals, hardness or other identified contaminants.

04
Treatment Capacity

Average and peak water flow in m³/h or m³/day.

05
Existing Treatment

Oil-water separation, flotation, filtration, biological treatment, adsorption, membranes or other systems.

06
Target Water Quality

Required outlet quality for injection, reuse, discharge or downstream treatment.

TECHNICAL RESOURCES

Learn More About Oil & Gas Water Treatment

Explore technical articles covering produced-water treatment, activated carbon, hydrocarbon removal, filtration and advanced polishing.

FREQUENTLY ASKED QUESTIONS

Oil & Gas Water Treatment FAQ

Treatment requirements depend on the water stream, oil content, salinity, contaminant profile and intended water use.

What is produced water?

Produced water is water brought to the surface during oil and gas production. Its composition can include dissolved salts, oil and grease, suspended solids, organic compounds and naturally occurring inorganic constituents.

Can activated carbon remove oil from produced water?

Activated carbon is more appropriately used for adsorption of selected dissolved organic compounds and polishing after suitable removal of free and dispersed oil. It should not normally be treated as the primary process for bulk free-oil separation.

Why is suspended-solids removal important for injection water?

Suspended solids can contribute to plugging, deposits and downstream operational problems. Required filtration depends on the injection system and water-quality objectives.

Why is produced water often difficult to treat with RO?

High salinity, oil, suspended solids, hardness and dissolved organics can create fouling and scaling challenges. Significant pretreatment may therefore be required before membrane treatment.

Can produced water be reused?

Depending on water chemistry and the intended reuse, produced water may undergo staged separation, filtration, adsorption, chemical treatment and advanced purification before reuse.

What information is needed to recommend treatment materials?

Useful information includes the type of water stream, oil and grease, suspended solids, COD, TDS, hardness, metals, treatment flow, existing process and required outlet quality.

OIL & GAS PROJECT SUPPORT

Looking for Water Treatment Materials for an Oil & Gas Project?

Share your produced-water or process-water analysis, target contaminants, treatment capacity, existing treatment process and required outlet quality. Our team can discuss suitable activated carbon, filter media, ion exchange resin and treatment options for your application.

Email Inquiry WhatsApp Phone